TUBE EXPO 2024
Visitor Registration Booth Application Newsletter
Countdown
Days
Hours
Min
Sec

Inflatable pipe purging systems for zero colour welds

 

Producing zero colour tube and pipe welds when joining metals such as stainless, duplex and chrome steels, titanium and zirconium can be challenging and at times can prove costly.


In many industries today the welding zone has to be purged of oxygen down as low as 100 ppm, or even lower in industries such as the dairy Industry, where food and beverage products are passing through them.

The tubes and pipes must be free from oxidation and discolouration to produce metallurgically sound welds and prevent corrosion and in addition, be welded with a good internal profile to prevent entrapment.

It most cases, it is not cost effective to fill entire tubes and pipes with an inert gas before, during and after welding.

To overcome these challenges, Huntingdon Fusion Techniques HFT has introduced PurgElite, a range of low cost Tube and Pipe Purging Systems, designed to drastically reduce the purging zone, saving welders both time and wasted inert gas costs.

Each PurgElite features IntaCal, a purge gas feed device, which means there is no complicated valve to adjust and set.

A centrepiece glow positioning indicator RootGlo comes as standard to ensure the system can be positioned accurately inside the tube or pipe.

HFT's innovative PurgeGate Valve is available as an accessory, a unique one way valve suitable for all types of Inflatable Pipe Weld Purging Systems. PurgeGate regulates the gas flow and pressure during weld purging to prevent the dams from over inflating and bursting.

Quick connect/disconnect fittings with collets and 'O' ring seals for gas tight sealing, fitted with anti-release circlip are fitted to all Systems to prevent parts accidentally separating inside pipes.

Heat Resistant Covers with a rating up to a temperature of 300ºC are available as accessories to protect the inflatable dams. These are attached with ties sewn into the covers.

There are many fabricators still using homemade devices fashioned from foam, wood, metal and rubber. They are wasting vast amounts of money on expensive argon gas and labour by allowing their welders to continue in their old ways.

By using PurgElite Tube and Pipe Purging Systems companies can save significant money in both time and inert gas costs.

Source: Engineer Live